Ürünlerimiz
Герметики и заполнители швов \ Thioseal / Thioseal Thix Полисульфид Два компонента Совместный герметик
Ürün Teknik Dökümanları |
| Description | ||
| EMULZER THIOSEAL is polysulfide and tar-based, two component, elastic, cold applied paste for horizontal joints. | ||
| Usage Areas | ||
|
-Airports, aprons and hangars. -Garage floors -Fuel facilities. -Factory floors. -Terraces -In general flooring joints. -Expansion joints -Aqueous acid and caustic tanks -Prefabricated structure joints. |
||
|
||
| Advantages | ||
|
• Cold applicable, heating is not required. • Resistant to fuel oil and hydraulic fluid. • Self-levelling • Tough rubbery seal that is not affected by climatic variations. • Resistant to dilute acids, dilute alkalis, petroleum, aviation fuel, diesel fuel, kerosene and white spirit |
||
| Surface Preparation | ||
|
Joint surfaces must be clean and dry. Oil, grease, bitumen or sealant remains must be completely removed. Loose materials on the joint walls must be removed; broken joint walls must be repaired. The joint should be cleaned with compressed air, if it is possible. After surface cleaning, EMÜLZER PU PRIMER should be used as primer. |
||
| Application | ||
|
Each set includes proper amount of component A and B. Firstly Componenet B must be stirred in its own package. Then entire quantity of component B is added to component A. The mixture is prepared by stirring Comp. A and B for 5 min. with a low speed electric stirrer (200-400 rpm). The mixture should be applied immediately. |
||
|
Ürün Teknik Dökümanları |
