Утечка проверки резервуаров для хранения воды изнутри (полиуретановая изоляция)

Leakproofing Water Storage Tanks from Inside (Polyurethane Based Insulation)
The tank must be completely free from of mud, dirt, rust, and grease. The two components of PU-COAT 2 must be stirred in its special container until the mixture is completely homogenous. Then the first coat is applied onto clean surface by using a brush or roller. After approximately 6 hours, a second coat is applied. If the application of the second coat is lagged, the first coat must be sandpapered because the surface will be too smooth.

PU-COAT 2 does not require any health and safety precautions because it does not contain any harmful materials. It can be safely used in closed spaces.