Ürünlerimiz
Изоляционные материалы на цементной основе \ Speed-X PowderStopper for Accelerated Setting
Ürün Teknik Dökümanları |
Description | ||
It is an accelerated setting powder stopper for water leakages. It contains mineral fillers, special cements and polimer catalyst additives. It is not a waterproofing product. After the application of Speed-X Powder, a waterproofing product must be applied on the surface. | ||
Usage Areas | ||
• It is used for stopping pressured water leakages, strong water flows, and capillar water leakages as well as inhibiting humidity. • It is an immediate solution to stop water leakage in foundation curtain walls, basements, water tanks, elevator shafts and damaged water pipes. • It can be used on concrete, plaster, alum, and bricks. |
||
|
||
Application | ||
• 1 unit of water is mixed with 2,5-3 units of Speed-X Powder until it becomes homogenous. (Quantity should be arrange as to consume 2-3 minutes.) The paste form of Speed-X Powder must be pressed onto leakage area with rubber gloves for approximately two minutes. • Reaction occurs just 1 minute after adding water, so the mixture must be prepared in small amounts and consumed immediately. • In case of dense leakage, Speed-X Powder can be applied directly in powder form. If it has to be applied onto a large surface, the direction of the application must be from outer sides to the middle. • After the Speed-X Powder application finished, Emülzer® Permo-Chim Crystal must be applied directly. • At low temperatures the mortar must be prepared with hot water. |
||
|
Packaging |
5 kg Plastic Pail 75 Pails / Pallet |
fine
Ürün Teknik Dökümanları |