Speed -X Liquid 3043 - Admixture for Waterproofing and Accelerated Setting | Бетонные и минометные добавки

It is used for preventing humidity and water leakage in concrete, brick walls, and stones.
It is an immediate solution to stop water leakage in foundation curtain walls, basements, water tanks, elevator shafts and damaged water pipes.
It can be used on concrete, plaster, alum, and brick.

Advantages

• It is caustic. It does not cause any damage for the rebar.

• Due to its content, the leakage slows down, and it helps to detect the source of leakage, thus allowing repair.

• It is economical.

Application

Speed-X Likit must be used with fresh, non-coagulant portland cement.
In the application plastic containers and rubber gloves must be used.
It must be 1 /I to 1 /3 diluted with water depending on the duration of setting.
It must be mixed with cement in a plastic container and pressed immediately onto damp surface with a trowel or rubber gloves.
Severe leakage problems require drainage with a rubber trunk by using a paste prepared with Speed-X Likit.

Consumption

Depends on requirement.

Packaging

5 kg Plastic drum - 90 Drums / Pallet

Ürün Teknik Dökümanları

Teknik Bülten

Ürün Föyü